Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Englewood
Chimney repair in Englewood typically costs $450-$3,200 depending on the damage, with mortar repointing starting around $450-$900 and full top-section rebuilds running $2,800-$3,200. Most jobs are diagnosed same day with a camera inspection and completed within one to two weeks. If you’ve got crumbling mortar, water staining, or a chimney that hasn’t been looked at since before you bought the house, call (516) 301-1549 for an honest assessment. We serve every neighborhood in Englewood, from the Flat district’s century-old estates to the newer construction on the east side.
What separates us from the other guys is simple: we put a camera down your flue and show you exactly what’s wrong before we quote a dollar. If there’s no damage, we tell you that too, and you don’t pay for a repair you don’t need.
Why Level Two Chimney Astoria Is Englewood’s Preferred Chimney Repair Company
Englewood isn’t like the rest of Bergen County. The housing stock east of Palisade Avenue is dominated by large pre-war homes built between 1895 and 1940, original clay-tile flues, multiple chimney stacks per roof, and decades of deferred maintenance. That’s exactly the kind of chimney work we specialize in. Our techs know the failure patterns on these homes before they even set up the ladder: spalled Chimney Repair top sections, eroded crowns, flashing that’s separating from the brick, and gas appliances venting into flues that were never lined for them.
Corrine Halstead leads our team, and she’s built the company on a rule we’ve followed since 2009: no recommendation without camera evidence you can see yourself. Clause 4 of the Haven Standard requires a documented photo record on every visit. You’ll walk away with images of your flue liner, your smoke chamber, your crown, and your flashing; not a tech’s vague description of what he thinks he saw. Englewood homeowners deserve better than a flashlight inspection that ends with a $7,000 liner quote. We’ve done more than 38,000 Chimney Cleaning & Sweep - Englewood visits since 2009, and every single one started with a written price before any work began.
Dispatch and scheduling are coordinated from our New York City office, but the crews who work in Englewood know these streets. They know the Flat district requires a different approach than the hill section, and they know the Hudson River moisture hits the west-facing stacks hardest. When you call, a live person answers; 24 hours a day, every day.
Our Chimney Repair Services in Englewood
Mortar Repointing
Older Englewood chimneys lose mortar joints faster than the brick itself. The freeze-thaw cycle along the Palisades pushes water into hairline cracks, freezes, expands, and pops the mortar out. Repointing in Englewood typically runs $450-$900 for a standard single-flue stack, more if multiple stacks need work. We cut out the failed joints to a proper depth, match the mortar color and profile to the original work, and document the repair with photos before and after. Cosmetic patching is not what we do; the joint has to actually hold.
Spalling Brick Repair
Spalling is when the face of the brick pops off, and it’s a common sight on Englewood’s 1920s chimneys. Water gets behind the brick face, freezes, and forces the surface off in sheets. On a 1927 Tudor in the Flat neighborhood, spalled brick at the top of the stack is often misdiagnosed as a simple repoint job. But if the brick faces are gone across six or eight courses, the entire top section needs to be rebuilt. Spalling brick repair in Englewood ranges from $150-$250 per brick for isolated work to $2,800-$3,200 for a full top rebuild. We’ll show you photos of the damage so you can see exactly which brick faces are gone and what the repair scope really needs to be.
Chimney Waterproofing
Moisture is the villain behind almost every major chimney failure in Englewood. The Hudson River corridor delivers moisture-laden northwest winds that drive water into aging masonry, and without a proper vapor-permeable sealant, that water keeps eating away at the structure. Waterproofing in Englewood typically costs $350-$650 per stack. We use breathable sealants that block liquid water but let the masonry expel water vapor; sealing with a non-breathable coating traps moisture inside the brick and accelerates spalling. On Englewood’s older chimneys, waterproofing is most effective after repairs are done, not as a band-aid over existing damage.
Flashing Repair
Flashing is the sheet metal where the chimney meets the roofline, and it’s the source of more leaks than most homeowners realize. On Englewood’s pre-war homes, original flashing was often lead or galvanized steel, and after 80 plus years of expansion and contraction, it separates from the mortar joint. We see this constantly on the Flat district’s larger homes where multiple chimneys meet the roof at different angles. Flashing repair in Englewood runs $450-$1,200 depending on access and the number of penetration points. We remove the old flashing, cut a proper reglet into the mortar joint, install new step and counter flashing, and document every layer with photos before the new flashing goes in.
Note: we do not DIY-coach on chimney repairs. A failed flue liner or damaged crown can allow carbon monoxide into the house or chimney fire into the framing. Inspection and repair work on the stack belongs with a trained, insured professional.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Englewood
When an Englewood chimney needs a new liner or a rebuilt crown, we source materials through our Haven buying network; not whatever was cheapest at the local supply house that week. We regularly install DuraFlex and HeatShield liner systems sized to the original flue dimensions, and we use Gelco and Olympia Chimney products for caps and crowns where they meet the spec. Because the majority of our Englewood customers drive the same models of century-old chimneys, we keep common sizes and materials stocked local or available within one business day. That means less waiting, and a written price on the exact system we’re going to install, before we cut anything.
Common Chimney Repair Problems We See in Englewood Homes
- Fractured clay tile liners hidden behind the masonry. Homes built between 1895 and 1940 in Englewood used clay tile liners that crack under decades of thermal stress and freeze-thaw cycles. Exterior visual inspections can’t see this damage. A Level 2 camera inspection is the only way to find it before gases seep into the house.
- Gas inserts vented into original boiler flues without a proper liner. This is an Englewood specialty, especially in homes that were subdivided into multi-family rentals in the mid-20th century. A flue sized for a boiler or furnace is too large for a gas insert, and the exhaust cools, condenses, and eats the masonry from inside. In Bergen County’s real-estate market, this shows up as a failed pre-closing chimney inspection letter.
- Deteriorated crowns with no overhang or drip edge. Original 1910s and 1920s crowns in Englewood were often built flat with a wash of mortar, which pools water instead of shedding it. Add Hudson River moisture and the freeze-thaw cycle, and the crown cracks, water penetrates, and the top section spalls. A proper rebuild requires a poured concrete crown with a drip edge.
- Per-unit flue isolation issues in subdivided homes. Englewood’s pre-war estates that were split into multi-family units often share a chimney stack between apartments. If the flues were not properly isolated when the home was subdivided, exhaust from one unit can enter another. Every repair on a multi-unit Englewood chimney must verify per-unit flue isolation and clearance. That’s a code issue we take seriously on every job.
Pricing for Chimney Repair in Englewood, NJ
Here’s what Englewood homeowners can expect to pay, with a written estimate before any work starts:
- Mortar repointing: $450-$900 per standard stack
- Spalling brick repair: $150-$250 per brick, or $2,800-$3,200 for a full top-section rebuild
- Chimney waterproofing: $350-$650 per stack
- Flashing repair: $450-$1,200 depending on roof access and penetration count
- Liner installation (DuraFlex or HeatShield): $1,800-$4,500 depending on flue size, height, and access
- Full chimney rebuild from roofline up: $5,500-$12,000
What moves the price in Englewood is access. A steep roof on a three-story Colonial with no staging location costs more than a simple one-story ranch. Older clay-tile flues that need to be broken out add labor. And multi-flue stacks always cost more than single-flue stacks because we inspect and repair each flue independently. Call (516) 301-1549 for a free written estimate. We never charge for the quote, and we never ask you to decide before you’ve seen the photos.
We Also Serve Cities Near Englewood
Our crews work regularly in Englewood and across the Hudson River corridor. If you’re nearby, we also provide Chimney Repair in Englewood services to homeowners in Jersey City and the surrounding Bergen County towns. Same standard applied everywhere: camera inspection, written price, photo record, and the 365-Day Done Right Promise in writing.
Serving Englewood, NJ - Our Local Coverage Area
We’re based in the Englewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Englewood
All of them need a camera inspection. On a 1915 Englewood home with four chimneys, the ones you don’t use are often the most dangerous. Original boiler flues from that era are commonly unlined or lined with cracked clay tile, and if a previous owner repurposed one for a gas insert or water heater without a proper liner, you may have exhaust gases moving through damaged masonry. A Level 2 camera inspection catches this. Skipping the unused flues is exactly how serious problems get missed for decades. Call (516) 301-1549 and we’ll scope every flue on the property, show you the footage, and give you a written report.
Crumbling mortar joints are rarely just cosmetic, but in Englewood they may also be a symptom of a bigger problem. Failed mortar often means water has been penetrating the chimney for years, and behind the damaged joints you may have spalled brick, rusted wall ties, or a deteriorated flue liner. Repointing only fixes the surface. We always scope the flue and assess the brick structure before recommending repointing alone, because on older Englewood homes we frequently find the top section needs a rebuild, not just new joints. If the flue is clean and the brick is sound, repointing runs $450-$900. Call (516) 301-1549 for a written estimate with photos of what we found.
No, it almost certainly is not legal, and it’s one of the most common code violations we document in Englewood homes. A gas insert produces cooler exhaust than a boiler or furnace, and when it’s vented into the original large flue without an insulated liner, the exhaust condenses inside the masonry and breaks down the clay tile from the inside. If you’re selling, a pre-closing chimney inspection will likely flag it. The reliable fix is a properly sized liner retrofit, which in Englewood typically runs $1,800-$4,500 depending on the stack. Call (516) 301-1549 for a scope and a written quote before you put the house on the market.
White staining is called efflorescence, and it means water is moving through your masonry and carrying dissolved salts to the surface. On Englewood’s older chimneys, this typically means the crown is cracked or missing its drip edge, and Hudson River moisture is entering from the top. Efflorescence itself is not structural damage, but it’s a reliable early indicator that spalling is coming. If you catch it at the staining stage, waterproofing after repairs may be all you need. If the brick faces have already started popping, you’re looking at a top rebuild. We document everything with photos so you can see exactly where the water is entering. Call (516) 301-1549 for a free estimate.
Once a year, even if you only light the fireplace on holidays. The reason is not creosote buildup; it’s water damage and structural deterioration that happens whether you burn or not. Englewood’s freeze-thaw cycle works on your chimney every winter, and a cracked crown or failed flashing won’t announce itself. Annual inspection is also what NFPA 211 recommends, and it’s what your homeowner’s insurer expects if there’s ever a claim. A Level 2 camera inspection with a written photo report costs far less than the rebuild you avoid. Call (516) 301-1549 to schedule.
Written by Corrine Halstead, Owner at Level Two Chimney Astoria, serving Englewood since the company’s founding.
Ready to get answers about your Englewood chimney? Call (516) 301-1549 for a free written estimate. We’ll put a camera down your flue, show you what’s there, and give you a price before any work starts. If you’ve got a competitor’s written quote, bring it in and we’ll give you a free second opinion.