Olympia Chimney Chimney Liner & Rebuild Nationwide

Olympia Chimney Chimney Liner & Rebuild in Astoria: What to Know First

Olympia Chimney liner replacement and rebuild work in Astoria typically runs $1,800-$6,400 depending on flue length, liner material, and whether the crown and top courses of brick need rebuilding. We’re an independent Olympia Chimney service provider, which means we work on these systems every week but we don’t answer to the manufacturer, we answer to you. Most liner jobs are done in one day; a full rebuild runs two to three. If you own an Olympia Chimney system in Astoria and you’ve been told the liner needs work, call (516) 301-1549 and we’ll put a camera down the flue and show you exactly what we’re seeing.

Call (516) 301-1549

How Olympia Chimney Products Fail - and How We Fix Them

Olympia Chimney makes solid products, but every brand has patterns. Here’s what we actually find in Astoria homes.

• Olympia stainless steel rigid liners, especially the 316L alloy series, develop pitting at the seam welds. It starts as hairline corrosion where the factory weld meets the parent metal. In Astoria’s salt-laden air off the East River, that weld line is the first place we see pinholes. Left alone, a pinhole becomes a crack that leaks hot gases into the chase. Fix: we replace the liner section or the full run depending on how far the pitting goes, and we photograph every weld before we close up.
• Olympia flexible liners kink at the smoke shelf transition in older Astoria rowhouses. The flues in pre-war brick homes along Steinway Street often take a sharp offset right where the liner exits the firebox. An Olympia flex liner, if it was pulled too tight on the original install, creases at that bend. A creased liner is a torn liner waiting to happen. Fix: we re-pull with proper standoff and insulate the offset section so the liner moves with thermal expansion instead of fighting it.
• Olympia terracotta flue tiles in original installs spall from decades of freeze-thaw cycling. On Astoria homes built before 1950, the clay tile liner Olympia specified in the original build is often cracked or flaking by now. We see spalling, which is when the tile face flakes off in sheets. The pieces drop into the smoke shelf and block the flue. Fix: we pull what’s loose, assess whether a stainless liner can be dropped inside, and tell you straight if the tile has to come out first.
• Olympia chimney caps and crowns on their prefab systems fail at the caulk joint before the metal does. The cap itself is usually fine. The sealant between the cap base and the crown is what gives out. Water gets under the cap, sits on the crown, and freezing weather in Queens cracks the crown in one season. Fix: we re-flash the cap base, recaulk with a polyurethane sealant rated for metal-to-masonry, and rebuild the crown if it’s already cracked through.
• Olympia Chimney chase covers on factory-built systems rust along the back edge where the flashing meets the chase. The back edge never gets sun, never dries out, and in a humid Astoria summer that’s a rust line within ten years. The rust creeps up the cover and compromises the liner top connection. Fix: we replace the chase cover with a properly pitched stainless unit and water-test the seam before we call it done.

Our Olympia Chimney Chimney Liner & Rebuild Process

Every Olympia job follows the same sequence, start to finish.

1. 1
   Book the visit. You call (516) 301-1549, talk to a live person, and we schedule. You get a text when the tech is on the way.
2. 2
   Camera inspection. We run the camera down the flue, top to bottom, and we record the whole pass. You see what we see. If you want, we’ll pull stills and put them in your report.
3. 3
   Written scope and price. Before anything gets touched, you get a written price, written scope of work, and written warranty. Clause 1 of the Haven Standard: have it in writing. No verbal quotes, no handshake numbers.
4. 4
   Parts decision. On an Olympia system, we’ll tell you whether an OEM Olympia liner section is worth it or whether a DuraFlex or HeatShield liner does the same job for less. We carry both and we’ll show you the price difference in writing.
5. 5
   The work. We do the liner install or rebuild, keeping the area sealed and cleaning as we go.
6. 6
   Test and document. We run the camera again after the work is done. You get a documented photo record of the finished job. Clause 4 of the Haven Standard. It’s been our practice since 2009.

Before

After

What Olympia Chimney Chimney Liner & Rebuild Costs in Astoria

Here are the numbers we actually see in this market.

• Stainless steel liner replacement, single flue, one story: $1,800-$3,200
• Flexible liner install with insulation wrap: $2,200-$3,800
• Liner repair (partial section, top connection, or crown reseal): $600-$1,500
• Partial rebuild (top courses of brick, crown, and cap): $2,500-$4,500
• Full chimney rebuild from the roofline up: $4,000-$8,500
• Full rebuild from the firebox up (rare, usually after fire or structural failure): $8,000-$14,000

What moves the price: flue length, roof pitch, whether scaffolding is needed, liner diameter, and whether the existing brick is worth saving. We bring a written estimate before work starts. Bring us a competitor’s written quote and we’ll do a free second opinion on it, line by line.

Why Astoria Homeowners Call Level Two Chimney Astoria for Olympia Chimney Work

We’ve done an Olympia liner in an Astoria rowhouse, a Steinway Street walkup, a Ditmars co-op conversion, and a postwar single-family out by Astoria Heights. The brand specifics change; the standard doesn’t. Every job gets a written price before work starts. Every job gets a photo record when it’s finished. Our techs are background-checked and uniformed, and the license number is on this page. If the liner goes wrong inside a year, the 365-Day Done Right Promise covers it: if it’s not done right, we make it right. We stock Olympia along with DuraFlex, HeatShield, and Gelco so you’re never backed into one manufacturer’s price. You deserve the right part at the right number.

As Corrine Halstead puts it when somebody asks whether the old liner can wait another season: “The camera doesn’t guess. Neither do we.”

FAQs